Thank you for your patience. Some pages may be slower than usual while we make improvements behind the scenes.

Tuesday 21 July 2026
Beta
The Daily Sydney

Sydney Local News · Every Day

community

Concreters in Sydney 2026, Concrete Driveway, Slab and Path Costs and How to Find a Licensed Sydney Concretor

Sydney concreting guide 2026: how much concrete driveways, slabs and paths cost in Sydney, how to find a licensed NSW Fair Trading concretor, and what to know before laying concrete in Sydney.

By Sydney Daily · Published 20 July 2026

How we reported this

Produced with AI assistance and reviewed against our editorial standards. Sources are linked where available. Spotted an error or need a correction? Contact [email protected].

Concreters in Sydney 2026, Concrete Driveway, Slab and Path Costs and How to Find a Licensed Sydney Concretor
AI-generated illustration

Concreters in Sydney 2026

Sydney has a large and competitive concreting market. Concreting work in NSW that forms part of a structural slab or requires a building permit should be carried out by a NSW Fair Trading-licensed contractor. Verify licences at fairtrading.nsw.gov.au. Concreting contractors should carry public liability insurance. Home building compensation (HBC) insurance is required for residential concreting work over $20,000.

How Much Does Concreting Cost in Sydney 2026?

  • Exposed aggregate concrete driveway (plain, 40m2, supply and lay), typically $4,500-$9,000 in Sydney
  • Exposed aggregate concrete driveway (exposed aggregate finish, 40m2), typically $5,500-$11,000 in Sydney
  • Coloured concrete driveway (40m2, supply and lay), typically $5,000-$10,000 in Sydney
  • Concrete path (1.2m wide, per lineal metre, supply and lay), typically $80-$160 per metre in Sydney
  • Concrete house slab (120m2, standard residential, supply and pour), typically $18,000-$32,000 in Sydney
  • Concrete shed slab (6m x 9m, 100mm, supply and pour), typically $3,800-$7,500 in Sydney
  • Concrete retaining wall (per lineal metre, supply and form), typically $350-$750 per metre in Sydney
  • Concrete removal / demolition (per m2), typically $50-$100 per m2 in Sydney

What to Know Before Concreting in Sydney

Sydney's sandstone rock substrate in inner suburbs requires rock breaking before concrete slab installation, this adds significant cost to concreting projects on rocky Sydney sites. Sydney's clay soils in western suburbs (Penrith, Blacktown, Liverpool) require appropriate sub-base preparation and site drainage to prevent moisture-related slab heave. Reinforced concrete (using steel mesh or rebar) is standard for driveways and slabs in Sydney, the specification should match the intended load (a driveway carrying a truck needs heavier reinforcement than a pedestrian path). Tree roots in established Sydney suburbs can crack and lift concrete paths and driveways over time, tree root management or root barriers should be considered during installation near established trees.

This article was compiled by AI and screened before publishing. See our editorial standards.

References Sourced but Not Limited to:

Beta · AI-assisted · human oversight

Your newsroom. Shaped by you.

The Daily Sydney is in beta. AI may assist with research, summarising and drafting. Automated checks assess sourcing, accuracy and editorial risk before publication, and sensitive material is held for human review. Spotted something off, or want us covering a topic? Tell us. Your feedback is entirely optional and helps shape what we publish next.

The Daily Network · local news across AUS